China specializes in exporting nails for more than 20 years! The monthly output is more than 2,000 tons, and the products are exported to more than 30 countries. If you need competitive prices and reliable partners, please contact us!
2.5”×BWG10 common round nail (length 63.5mm, line diameter 3.25mm) all parameters.
I. Product Features
1. Basic specifications: the total length is 63.5mm(2.5 inches), the wire diameter of BWG10 is 3.25mm, the raw material Q195/Q235 low-carbon cold-drawn steel wire is a national standard general building-grade material.
2. Structural advantages: standard flat round anti-slip nail head, polished rod nail body and diamond sharp point; The nail body is thick and has high bending strength, so it is not easy to bend the nail and split solid wood when driving.
3. Anchorage performance: medium-thick shaft, sufficient penetration depth, excellent nail holding force, giving consideration to penetration and drawing force, suitable for thick wood fixation.
4. Cost-effective ratio: low cost of raw materials and stable mass production, which is the main nail of conventional specifications for South America, Africa and the Middle East.
5. Derivative models are optional: it can be made of threaded rod/twist rod, and the anti-pulling ability is improved by 30% (mostly used for roof fixing).
II. Four mainstream surface treatment (commonly used in foreign trade)
1.Polish the bright nail.
Only mechanical deburring and polishing, no coating, bright iron; The lowest cost, limited to indoor dry environment, wet and easy to rust, just needed in the inland of the Middle East.
2. Electro-galvanized EG(Electro-Galvanized)
Thin zinc layer of 5-15μm, bright silver, moderate rust prevention, the highest cost performance, the world’s mainstream model, indoor+light outdoor.
3. Hot dip galvanized HDG(Hot Dipped Galvanized)
Thick zinc layer of 50-100μm, gray and dumb zinc layer, super corrosion resistance, special for coastal, rainy and humid areas (Latin America, Southeast Asia, West Africa), preferred for outdoor civil engineering.
4. Plastic coating/black paint VC/Black
Outer PVC coating/blackening and rust-proof, waterproof and acid-and alkali-resistant, special for gardening fences and wet wood structures.
III. Export standard packaging (universal for shipping/containers, can be customized as required)
1. Small packaging (supermarket, hardware store retail, mainstream in America/Latin America)
-1kg/2.5kg/7LB(3.175kg)PE plastic bag/small paper box; 8 small boxes/large cartons, each with a net weight of 20–25kg.
2. Industrial bulk (engineering wholesalers, building materials market, mainstream in Africa/Middle East)
-lined with PE waterproof inner membrane+thickened corrugated box, 25kg/ standard carton (the most common export specification);
-Options: 50 lbs/box, woven bag 25kg/ bag (low-end market in bulk).
3. Consolidation of the whole container (20GP container)
Carton palletizing +IPPC fumigation-free plywood pallet (in line with ISPM15 of various countries’ customs), wrapped with stretching film and fixed to prevent sea transportation from being damaged by moisture; A 20-foot container holds about 26-27 tons.
HS code: 73170000 (nail general customs declaration code)
IV. The application field
1. Building and civil engineering (main purpose)
Wooden keel, wooden frame, wallboard/gypsum board fixing, wood square splicing, floor rough floor laying, door and window frame embedded and fixed.
2. Woodworking furniture
Solid wood bedstead, cabinet, wooden box, tray making, ceiling decoration and wood veneer fixing.
3. Outdoor engineering
Anti-corrosion wooden plank road, courtyard fence, orchard stake fixation, simple wooden house, outdoor wooden shed (hot dip galvanizing is preferred).
4. Other industries
Wooden packing box, agricultural wooden frame, hardware maintenance and temporary reinforcement of infrastructure in packaging factory.
Post time: Jun-05-2026